SDS100 Sentinel Software | Saving & Updating Favorite Lists, & Update Software

SDS100 Uniden Scanner

This Video applies to the BCDX36HP Sentinel Software, You can also Apply this to the Homepatrol Sentinel software version.

In this video we cover:

Download the software
Installing the software
Update the database
Update firmware
Reading from the scanner
Editing favorites list
Creating a favorites list.

Questions about the SDS100

Common questions we receive about the Uniden SDS100 Scanner

How do I Turn Full database off

I want to listen to additional areas and service types without ruining the programming you did. Can I do this? Listen to full database or make favorites without ruining the preprogramming?

What is Custom Search?

Custom search is a mode the scanner can be set (Allows you
to search the scanners 10 programmed frequency ranges)

To disable Custom Search

Press Menu under ”Search for…”,

Then go to “Edit Custom”.

Once you’re in the “Select Custom” Menu, Set lock outs on
Custom1-10, this will disable all custom searches.

To enable Custom Search

Press Menu. Scroll to Search for... and press E/yes.

Scroll to Custom Search and press E/yes.

You can also start a Custom Search assigned to a QK by
holding on any Channel in Scan Mode and pressing Func then 1, 2, or 3.

To exit Custom Search press to Scan (soft key1).

How do I get rid of a channel with Static?

How do I know if all my local channels are programmed?

How do I disable Close call?

How do I know If I need re-programming?

Frequencies used by public safety are subject to change at any time, A good example is when an area transitions to a digital system from analog.

If you aren’t sure contact us

admin@bearcatwarehouse.com
Website Chat service
877-568-7226.

Changes are listed on Radioreference, Each county has its own portion of the website. Chages are listed at the top of the respective county page under “Last Updated”. If there
are recent changes listed for the channels your interested in re-programming is required. We offer several different programming options, you can find them isted here:

Click here for programming options

What’s the difference between the SDS100 and the cheaper digital scanners?

Does it come with the larger battery?

Why get it programmed if you could type your zip code?

The zip code featureonly allows for one zip code to be entered at a time, but the zip code function is used to tell the scanner which geographic region of the frequency database to enter-- it does not indicate the exact area to be scanned. For monitoring something like a tri-county area I strongly recommend the Optimization service as it tailors the scanner to a customer's local area rather than thousands of channels based on a geographic region.

What do the upgrade keys do?

Can the SDS100/200 be programmed with chromebook pc or Apple Computer

What is IQ scan?

Does it come with a charger?

What else do I need to buy with it?

How long does it take to charge?

Typically charging times may vary but are typically 8-14 hours, this information is listed in your owners manual.

USING INTERNAL BATTERIES

The SDS100 is powered by a Lithium Ion battery. When the scanner is turned on, the scanner does not charge the batteries.
When the scanner is turned off, the scanner will charge the batteries.
You can use external USB power to power the scanner while it is on.
However, the USB power source must be rated at 1A or greater to prevent battery drain during operation.
The included AC adapter is rated at 2A and can power or charge the SDS100.
The scanner’s charge indicator is red during charge and green when complete.
Note: If the scanner gets too hot while charging, charging automatically stops.

VIEW THE BATTERY LEVEL

You can set a custom display area to show the battery voltage level. See “Customizing the
Display.”

You can power the scanner by using the micro USB or a mini USB connector, but only the mini connector can be used for charging.
You charge the scanner’s battery by connecting the scanner’s USB mini connector ("Charge" port) to a USB power source and powering off the scanner.
The power source must be rated 1A or higher to charge at a full rate. It takes about 16 hours to fully charge the scanner with the 2000ma AC adapter supplied.
If you connect to a PC or other lower-power USB source, charging will take longer or may not even charge at all.
The red charging LED will appear to the right of the alert LED during charging and turn green when complete when the scanner is off.
The radio will charge and scan at the same time only with an adapter rated at 1000ma or more to prevent battery drain during operation.

Note: If the scanner gets too hot while charging, charging automatically stops.

how long does the battery last?

What’s the difference between the SDS100 and SDS200?

Does it pick up encryption?

How far is the range?

I get it on broadcastify why can’t I get it on my scanner?

Comparing your radio to someone using broadcastify isn’t a great comparison unfortunately. Broadcastify has 2-minute delay scanners play in real time. The end user broadcasting on broadcastify is using a scanner with specific programming and location. Essentially you would have to be in the same area, using the same scanner and programming to truly compare what you have to a broadcasifiy user.

Is it Bluetooth compatible?

Scroll Control Volume & Squelch

Press then turn to adjust volume level in Scan Mode.

Press to view battery level.

Press Func then Vol turn to adjust the squelch.

Press to select a menu item or save an entry in Menu Mode.

Turn to select characters with Data Naming.

Turn to select Scan/Search direction and to continue Scan/Search in Scan/Search Modes.

Turn to scroll Channels or Frequencies in Hold Modes.

Turn in Department Pause to scroll Departments.

Turn in System Pause to scroll Systems.

Turn in Site Pause to scroll Sites in current system.

Turn in Search Pause to select Custom Searches to enable in Search Mode.

Turn to select next or previous recording in Replay Mode.

Turn to resume Close Call Search in Close Call Only Mode.

Turn to start a Quick Search in Close Call Hold Mode.

Turn to select next Weather Channel in Weather Scan.

Turn to select Tone-Outs in Tone-out Standby Mode.

Side Menu Button

Press to enter Menu Mode.

Press to return one level in Menu Mode.

Press Func then Menu for Search Menu in Search Mode.

Press Func then Menu for Close Call Menu in Close Call Mode.

Press Func then Menu for Weather Menu in Weather Scan.

Side Function Button

Press to enter Function Mode for 3 seconds.

Service Types

Our programming services include all towns, cities, municipalities within the county you requested for public safety channels such as Police, Fire, Ems, and state police. The scanner does have service type options in the radio so they can be turned on and off when desired. So, for example if you only wanted to hear Fire and EMS for the day you would turn all other service types of such as Law and only leave the ones you want on. Also keep in mind if there are any channels you completely do not want you can permanently avoid them by double tapping the avoid button on your scanner

Downloads, Manuals, Software, Fixes, Forms, & More

What is included in the box?

PRODUCT DIMENSIONS & WEIGHT

How if fix Net Framework on your computer

Uniden SDS100 Digital Police Scanner

$649.99

Unit price: per

SKU: SDS100

Uniden Expert Programming

True I/Q Receiver, Trunk Tracker X

Complete USA/Canada Radio Database
Location Control for Simple Operation
3.5" Customizable Color Display
Ships with new larger battery

Uniden Custom Programmers will add county programming to your scanner. We remove the guesswork, tedium, and frustration from from manually programming your scanner for your area. Our programming department will preload your selected county/counties public safety frequencies so all you have to do is turn it on.

Your scanner will work right out of the box!

What else should I buy?

Click on the extra items below for more details
Upgrade Keys